Prodeva Recycling Equipment

OTHER RECYCLING EQUIPMENT

PLASTIC PERFORATOR DENSIFIER Model 400

Model 400 is designed to perforate and densify plastic bottles to aid in the ever increasing problems of storage, baling time, wear and tear on balers and will also increase bale density. This compact, fit anywhere machine can play several roles, it can be conveyor fed, mounted on platforms, over compactors or be placed on a stand and be hand fed. This machine is built to maintain a high level of performance. Jamming is prevented by a heavy duty spring loaded drum and by the high level of torque created by dual motor drives. The perforator drums are equipped with replaceable spikes.

Rated capacities of Model 400: 250 (2 Liter) Bottles Per Minute
Safety engineered throughout
Factory direct parts and service.
Model 400 will process up to 3 liter PET and 1 gallon HDPE.

Dimensional Drawing

Get your free
PDF viewer here.

Specifications Model 400

Drive: (2) 1 HP Motors 230/460/60/3
Densification Chamber Dimensions: 20 3/4"H x 19 3/8"W x 36 1/2"L
Base Dimensions: 31 1/2" x 40 1/2'
Drums: (2) 18" Long x 16" Diameter
Weight: Approximately 580 lbs.
Densification Rates: 2:1 - 3:1 Depending on Container Type
Cycle Time: Continuous Feed
Optional feed a discharge conveyors available

CAN SORTER Model CM-18-10

This medium volume can sorter allows you to easily sort aluminum cans from steel, bi-metal, or other ferrous materials. It allows you to sort aluminum cans before you buy them by simply dumping them into the 3/4 cu. yd. hopper. Its 5" casters make it mobile.

Rated capacity of 3,000 lbs. per hour.
Easily separates aluminum cans from steel and other contaminants.
Factory direct parts and service.

Dimensional Drawing

Get your free
PDF viewer here.

Specifications Model CM-18-10

Conveyor bed 18" wide by 10' long
8" permanent magnetic head pully
PVC 120 belting with 2" bonded cleats
Dirt and moisture screen in hopper
1/2 HP motor
Thermal-rated start/stop button
Capacity of over 3,000 lbs. per hour
5" casters for mobility
6" self-cleaning tail pulley
Direct drive speed reducer
Discharge chute for ferrous cans
3/4 cu. yd. hopper
Constructed of heavy gauge steel
Widths available of 12", 24" and 36"

Other Standard Models Available

CM-12-10 12"x10'
CM-24-10 24"x10'
CM-36-10 36"x10'

FLATTENER BLOWER Model 500

Model 500 is designed to separate aluminum from steel and bi-metal cans, crush and blow aluminum cans into trailers, rolloffs, or any type of holding container. Machine is equipped with replaceable drum cleats, spring loaded crusher plate, casters for easy mobility, magnetic head pulley, and high efficiency blower.

Rated Capacity: over 2000 lbs. per hour
Factory direct parts and service
Safety engineered throughout

Dimensional Drawing

Get your free
PDF viewer here.

Specifications Model 500

5 HP crusher motor
7.5 HP blower motor
1/3 HP conveyor motor
8" diameter magnetic head pulley
Density up to 7 lbs. per cubic ft.
12' long 8" diameter adjustable delivery tube
Dirt and moisture screen in bottom of infeed hopper
Steel can reject chute, adjustable for left or right hand discharge
18" wide cleated conveyor belt
Continuous feed
5" casters

HYDRAULIC DUMPER PD25 Series

Our container dumper provides a cost-effective, safe and ergonomic way of dumping materials out of boxes, gaylords, carts or hoppers. This heavy-duty low cost machine can be modified to dump most any width container.

Rated Capacity: over 2500 lbs
Dumping height of 70"
Safety engineered throughout

Get your free
PDF viewer here.

Specifications Model 500

3" bore cylinder
2 HP hydraulic pump motor
Heavy-duty structural steel construction
Adjustable height and depth stabilizing bar or fixed hold-down angles
Free standing
Power up and down standard
Discharge angle 45 degrees
Standard dump heights of 50", 62", 70".

CONVEYORS

Prodeva manufactures all types of conveying equipment, including infeed and discharge conveyors for all types of Recycling Equipment, Baler Infeed Conveyors, Sorting Conveyors, Magnetic Separators, or any type needed for a Recycling, Resource Recovery, or MRF operation. We will help you with the design of a facility, installation, and start-up if needed.

We can manufacture any type of system for conveying or separating co-mingled materials, from the very basic to the elaborate. At Prodeva, we can build our equipment to your specifications so you don't have to worry about standard widths or lengths.

View photo

Aluminum Horizontal Conveyer

Aluminum Horizontal to Incline Conveyor

Get your free
PDF viewer here.

Aluminum Incline Conveyor

Incline & Baler Feed Conveyors

CC 18 -11 Incline Conveyor

Grinder Feed Conveyor

Custom conveyors are our standard!

Contact us for all your conveyor needs, let our knowledge and 40 year experience work for you.

1 Year Written Warranty

All Prodeva brand equipment carries a warranty on workmanship and materials, provided equipment is used for its intended use and maintained properly.

We reserve the right to repair or replace parts at our option. Ask for further details. Prodeva Inc., also reserves the right to improve or alter products without prior notice.